Skip Navigation Links | English (United States) | Products | OLCT 100 - OLC 100 fixed gas detector

Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100).​ Whatever your application Teledyne Gas and Flame Detection offers a solution: MEMS, catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe versions. 

In addition to this range the OLC/OLCT 100 offers an infrared sensor​, which allows it to be used in more severe environmental conditions, where the presence of poisons could harm the use of a catalytic sensor.

SIL 2 certified according to EN 50402, the 100 series is very safe. As an example the Probability of Failure on Demand (PFD) of combustible versions is 1 out of 418 for the catalytic version and 1 out of 2857 for the infrared version.

​​OLCT 100 Gas Detector Versions​

OLCT 100 XP: Explosion-proof version is equipped with a catalytic, MEMS electrochemical or semiconductor sensor, for detection of combustible, toxic gases or oxygen.​

OLCT 100 IS: Intrinsically safe version and equipped with an electrochemical sensor for detection of toxic gases or oxygen.

OLCT 100 XP IR: Explosion-proof version and equipped with an infrared sensor for detection of CO2 / CH4 / refrigerants.

OLCT 100 XP HT: High temperature explosion-proof version, for detection of explosive gases up to 200°C.​​​​​​​​​​​​​​​​​​​​​

  • Certification Description
    ATEXA product regulation which ensures the safety of equipment intended for use in potentially explosive atmospheres in the European Union.
  • CEindicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements.
  • China ExTesting and certifications providers in China
  • EACGost R and EAC certifications are mandatory in order to have access at all to the Russian market and the markets of the five EAC members
  • IECExThe IECEx System is an international system for the safety of equipment installed in a potentially explosive atmosphere.
  • INMETROBrazil's Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial, also known as INMETRO, is the body responsible for recognizing certification organizations, which should be responsible for certification of products for compliance and author
  • SILSafety Integrity Level (SIL) defined as a relative level of risk-reduction provided by a safety function, or to specify a target level of risk reduction